Jiansu Hengsai Metal Co.,Ltd
Jiansu Hengsai Metal Co.,Ltd
Add to Cart
Spangled galvanized steel sheet is the spangle obtained by the condensation of the zinc coating under normal conditions after galvanizing. It is mainly used in buildings and other places where there is little direct contact with the human body.
Galvanized steel sheets without spangles are mainly produced through a special production process to control the lead in the zinc pot to a certain level, or after the strip steel is out of the galvanized pot, it undergoes special treatment to control the spangles to less than a certain level. Mainly used in home appliance housing.
| item | value |
| Standard | AiSi |
| Grade | SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z |
| Application | making pipes, cutting sheets, making small tools, making corrugated sheets, making container, Container Plate |
| Place of Origin | China |
| Tolerance | ±1% |
| Processing Service | Bending, Welding, Decoiling, Punching, Cutting |
| Steel Grade | 310S, 316L, 316, 321, 430, 309S, 304, 304L, 904L |
| Surface Finish | 2B |
| Delivery Time | 15-21 days |
| Product name | Galvanized Steel Coil / Sheet |
| Width | 600 - 1250MM |
| Zinc Coating | Z30 - 600g/m2 |
| ID of Coil | 508/610MM |
| Thickness | 0.105- 4MM |
| Surface Structure | Regular spangle,Minimum spangle, Zero spangle, Big spangle |
| HRB | Soft Hard (<60),Medium Hard (60-85), Full Hard (85-95) |
| Packaging | Dust-proof kraft sheet, iron packing, Angle protective, packing belt |
| Payment Terms | T/T, LC, Western Union, Paypal, O/A, DP |
| Regular Order | 25 tons or one container |
Galvanized Steel 0.18mm-20mm thick galvanized steel sheet 2mm thick Hot dip galvanized steel sizes galvanized sheet metal roll
| bse metal type | Grade | CHEMICAL COMPOSITION % | |||
| C | Si | Mn | P | ||
| cold rolled steel sheet | DC51D+Z (St01Z, St02Z, St03Z) , DC51D+ZF | ≤0.10 | - | ≤0.50 | ≤0.035 |
| DC52D+Z (St04Z), DC52D+ZF | ≤0.08 | - | ≤0.45 | ≤0.030 | |
| DC53D+Z (St05Z), DC53D+ZF | ≤0.08 | - | ≤0.40 | ≤0.030 | |
| DC54D+Z (St06Z), DC54D+ZF | ≤0.01 | ≤0.10 | ≤0.30 | ≤0.025 | |
| DC56D+Z (St07Z), DC56D+ZF | ≤0.01 | ≤0.10 | ≤0.30 | ≤0.025 | |
| hot rolled steel sheet | DD51D+Z (St01ZR, St02ZR) | ≤0.10 | - | ≤0.50 | ≤0.035 |
| DD54D+Z (St06ZR) | ≤0.01 | ≤0.10 | ≤0.30 | ≤0.025 | |
